Boat Life Saving Equipment Requires Frequent Maintenance

Ⅰ. About the boat life saving equipment

Despite the importance of boat life saving equipment, most crew members and passengers on board prefer that they remain idle. However, they are a necessary last resort for those on board, and over the years many have been grateful to have them.

Boat life saving equipment has always been an integral part of safety procedures at sea. It is important to have a prescribed amount of boat life saving equipment on board that can be easily accessed and used in an emergency. Boat life saving equipment is basically a small boat that is left on board for emergency abandonment to prevent accidents such as people falling into the water and ship accidents. They are primarily used as a device to quickly and efficiently evacuate persons in distress from a ship and then help them reach a safe location. The boat life saving equipment can be quickly deployed from the boat with the help of a davit system fixed to the side of the boat. They include a motor, and unlike inflatable rafts and boats, they are smaller and slower. Inflatable boat life saving equipment consists of an automatic inflation system, which is faster and more convenient for persons in distress.

Boat life saving equipment drills are required by law on large merchant ships. In the military, lifeboat equipment can double as a whaling boat, dinghy or show. The ship's cruise supplier often doubles as lifeboat equipment. Recreational sailors usually carry inflatable life rafts, but some prefer small active lifeboat equipment, which are more difficult to sink and allow for safe navigation.

Ⅱ. Boat life saving equipment needs maintenance

In an emergency, the presence of boat life saving equipment on board can play an important role in a quick evacuation at sea. Therefore, they need to work flawlessly all the time. Here are some tips for seafarers and engineers on how to ensure proper maintenance of boat life saving equipment at all times.

1. To avoid breakage and damage, ship crews must carry out boat life saving equipment maintenance every 3 months to check and repair damage.

2. The hull of the boat life saving equipment must be regularly inspected for any cracks and holes.

3. The air support system in the boat life saving equipment should be checked. The pressure of the air bottle must be verified to avoid the passage of toxic gases.

4. The sprinkler system installed on the boat life saving equipment should be regularly inspected to see if the valve is functioning properly and if it is frozen or damaged.

5. The engine of the boat life saving equipment must be tested for at least 3 minutes per week.

6. The boat life saving equipment batteries that provide lighting for the boat life saving equipment and help start the engine should be replaced every 2 to 3 years.